https://doi.org/10.4081/jae.2024.1562
Development and test of a spring-finger roller-type hot pepper picking header
Published: 19 February 2024
Abstract Views: 376
PDF: 259
HTML: 2
HTML: 2
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This study developed a spring-finger roller-type hot pepper picking header to increase picking efficiency, performance, and lower harvesting costs. The picking header was mainly composed of a roller, spring-fingers, a steel frame, an upper cover plate, and transmission parts. Based on SolidWorks, a picking structure model for hot peppers was created in accordance with their mechanical properties. The movement law of the picking springfinger was analyzed based on the working principle to select appropriate motion parameters of main factors. Based on these chosen parameters, a prototype hot pepper picking header was created, and field tests were conducted to investigate the primary factors influencing the harvesting effect. The rotation speed of the roller and the travel speed of the picking machine were monitored by setting sensors. Using Design Expert, the test results were examined and optimized in accordance with a central composite design. The orthogonal test results showed that when the roller rotation speed was 215.00 r⋅min−1, and travel speed was 3.59 km⋅h−1, the hot pepper picking header had the best harvest effect. The picking rate was 98.47%, and the breakage rate was 3.87%. The hot pepper picking header with a spring-finger roller type and good picking effect were demonstrated by the field experiment.
Food and Agriculture Organization-World Health Organization (FAOWHO), 2022. Production Share of Chilies and Peppers, Dry by Region. Available online: https://www.fao.org/faostat/en/#data/QCL/visualize (accessed on 08 July 2022).
Statistics Korea, 2022. Production of Chili Pepper. Available online:http://kostat.go.kr/portal/eng/pressReleases/1/index.board? bmode=read&aSeq=415243 (accessed on 12 July 2022).
Wang R , Zheng Z , Lu X , et al. 2021, Design, simulation and test of roller comb type Chrysanthemum (Dendranthema morifolium Ramat) picking machine[J]. Computers and Electronics in Agriculture, 187(1):106295.
DOI: https://doi.org/10.1016/j.compag.2021.106295
Dai, X., & Liu, Z.. 2005. On current situation and its development trends of the pepper industry in China. Journal of China Capsicum. vol. 4, pp. 1-6.
Bidhan Chandra NathYo-Sang NamMd. Durrul HudaMd. Mizanur RahmanPanna AliSubrata Paul. 2017. Status and constrain for mechanization of rice harvesting system in bangladesh. Agricultural Science (English), 8(6), 492-506.
DOI: https://doi.org/10.4236/as.2017.86037
Hu S. J., 2012.Design and research of the comb -type picking device for chili pepper. Shi Hezi University, Xin Jiang.
Chen, Y.C.; Kong, L.J.; Wang, H.X., 2013. Research of mechanism and experiment of 4LZ-3.0 self-propelled pepper harvester. Appl. Mech. Mater. 419, 217–222.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.419.217
Funk, P.A.; Walker, S.J., 2010. Evaluation of five green chili cultivars utilizing five different harvest mechanisms. Appl. Eng. Agric. 26, 955–964.
DOI: https://doi.org/10.13031/2013.35906
Funk P A, Herbon R P. 2011. A Systems Approach to Chile Harvest Mechanization[J]. International Journal of Vegetable Science, 17(3):296-309.
DOI: https://doi.org/10.1080/19315260.2010.549167
Wall, M. M., Walker, S., Wall, A. D., 2003). Yield and quality of machine harvested red chili peppers. American Society for Horticultural Science (2), 1-5.
DOI: https://doi.org/10.21273/HORTTECH.13.2.0296
Stanly N. M., Jayan P. R., Malkani P., et al., 2020, Design, development and evaluation of pepper harvester. J. Agri Search. 7, 82–85.
Kang, K.S., Park, H.S., Park, S.J., 2016. Study on optimal working conditions for picking head of self-Propelled pepper harvester by factorial test. J. Biosyst. Eng. 41, 12–20.
DOI: https://doi.org/10.5307/JBE.2016.41.1.012
Kim, T.H., Kim, D.C.; Cho, Y., 2020. Performance comparison and evaluation of two small chili pepper harvester prototypes that attach to walking cultivators. Appl. Sci., 10, 2570.
DOI: https://doi.org/10.3390/app10072570
Nam, J.S., Byun, J.H., Kim, T.H., et al. 2018, Measurement of mechanical and physical properties of pepper for particle behavior analysis. J. Biosyst. Eng. 43, 173–184.Nam, J.S., Kang, Y.S., Kim, S.B., Factorial experiment for drum-type secondary separating part of self-propelled pepper harvester. J. Biosyst. Eng. 2017, 42, 242–250.
Shin, S.Y., Kim, M.H., Cho, Y. et al., 2021. Performance testing and evaluation of drum-type stem separation device for pepper harvester. Appl. Sci. 11, 9225.
DOI: https://doi.org/10.3390/app11199225
Qin, X., Lei, J., Chen, Y., 2012. Design and research on key components of a novel self-propelled chile pepper harvester. Appl. Mech. Mater. 468, 794–797.
DOI: https://doi.org/10.4028/www.scientific.net/AMR.468-471.794
Lei, J., Qin, X., Chen, Y. 2015, Design and analysis on key components of a novel chili pepper harvester’s picking device. Open Mech. Eng. J. 9, 540–545.
DOI: https://doi.org/10.2174/1874155X01509010540
Duan Y., 2014. Damage mechanism and experimental study of mechanical harvesting peppers. Shi Hezi University, Xin Jiang. 10-50.
Srikanth V., Rajesh G. K., Kothakota A., et al. 2020, Modeling and optimization of developed cocoa beans extractor parameters using box behnken design and artificial neural network. Computers and Electronics in Agriculture, 177: 105715.
DOI: https://doi.org/10.1016/j.compag.2020.105715
Yu Z.Y., Yang K., Hu Z.C. et al., 2023, Parameter optimization and simulation analysis of floating root cutting mechanism for garlic harvester. Computers and Electronics in Agriculture. Volume 204, January 2023, 107521. https://doi.org/10.1016/j.compag.2022.107521
DOI: https://doi.org/10.1016/j.compag.2022.107521
How to Cite
Song, Z. (2024) “Development and test of a spring-finger roller-type hot pepper picking header”, Journal of Agricultural Engineering, 55(2). doi: 10.4081/jae.2024.1562.
Copyright (c) 2024 the Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Fabiana Convertino, Ileana Blanco, Evelia Schettini, Giuliano Vox, A nature-based system for improving Mediterranean buildings’ performance: contribution to energy saving by heat transfer reduction and influence of climatic parameters , Journal of Agricultural Engineering: Vol. 54 No. 3 (2023)
- Tommaso Baggio, Francesco Bettella, Lucia Bortolini, Vincenzo d'Agostino, Hydrologic performance assessment of nature-based solutions: a case study in North-eastern Italy , Journal of Agricultural Engineering: Vol. 54 No. 2 (2023)
- Eleonora Iaccheri, Chiara Cevoli, Santina Romani, Marco Dalla Rosa, Giovanni Molari, Angelo Fabbri, Simple and efficient approach for shelf-life test on frozen spinach and parsley , Journal of Agricultural Engineering: Vol. 52 No. 3 (2021)
- Roberto Fanigliulo, Marcello Biocca, Daniele Pochi, Effects of six primary tillage implements on energy inputs and residue cover in Central Italy , Journal of Agricultural Engineering: Vol. 47 No. 3 (2016)
- Senanur Durgut Malçok, Azime Özkan Karabacak, Ertürk Bekar, Cüneyt Tunçkal, Canan Ece Tamer, Influence of a hybrid drying combined with infrared and heat pump dryer on drying characteristics, colour, thermal imaging and bioaccessibility of phenolics and antioxidant capacity of mushroom slices , Journal of Agricultural Engineering: Vol. 54 No. 3 (2023)
- Carmelo Riccardo Fichera, Luigi Laudari, Giuseppe Modica, Application, validation and comparison in different geographical contexts of an integrated model for the design of ecological networks , Journal of Agricultural Engineering: Vol. 46 No. 2 (2015)
- So Ishizaki, Hironori Hirai, Takayasu Sakagaito, Tomohiro Takeyama, Naoyuki Oido, Tokuo Tamura, Mikio Mizutani, Yoshiki Watanabe, Mikio Umeda, Development of a transplanter-based transplanter for vegetable seedlings cultured in a cuttable nursery mat , Journal of Agricultural Engineering: Vol. 55 No. 2 (2024)
- Ferruccio Giametta, Flavio Fucci, Pasquale Catalano, Giovanna La Fianza, Thermo-fluid-dynamic modelling of a cold store for cheese maturation , Journal of Agricultural Engineering: Vol. 43 No. 4 (2012)
- Daniel Veal, Lutz Damerow, Peter Schulze Lammers, Michael Blanke, Kinematic model for mechanical apple blossom thinning , Journal of Agricultural Engineering: Vol. 55 No. 1 (2024)
- Andrea Petroselli, Dario Romerio, Piero Santelli, Roberto Mariotti, Silvano Di Giacinti, Luca Casini, Carmine Testa, Assessing sprinkler systems performance with a novel experimental benchmark , Journal of Agricultural Engineering: Vol. 52 No. 3 (2021)
<< < 2 3 4 5 6 7 8 9 10 11 > >>
You may also start an advanced similarity search for this article.
