https://doi.org/10.4081/jae.2024.1553

Kinematic model for mechanical apple blossom thinning

Vol. 55 No. 1 (2024)
    Published:23 January 2024
    Cycloids, kinematic, mechanical thinning, sustainable horticulture, trajectory, alternate bearing
    Abstract Views: 698
    PDF: 273
    HTML: 2
    Publisher's note
    All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

    Authors

    Daniel Veal
    Institute of Agricultural Engineering, University of Bonn, Germany; Department of Mechanical Engineering, University of Tennessee, Chattanooga, TN, United States.
    Lutz Damerow
    Institute of Agricultural Engineering, University of Bonn, Germany.
    Peter Schulze Lammers
    lammers@uni-bonn.de
    Institute of Agricultural Engineering, University of Bonn, Germany.
    Michael Blanke
    INRES, Horticultural Science University of Bonn, Germany.

    The international apple trade requires apples with diameters of over 70 mm. Left untouched, apple trees tend to produce many apples of small diameter. To increase apple size, the number of blossoms can be reduced in their early growth stage, leaving fewer apples that will grow larger because of access to a greater portion of nutrients. Over the past few decades this has been mainly accomplished through chemical means, but recent demand for sustainable fruit production with fewer chemicals requires means of blossom thinning using, e.g., mechanical methods, i.e., a machine with rotors and brushes. The goal of this project was to perform kinematic analysis on such a mechanical thinning machine to model the motion and behavior, both mathematically and graphically, as well as offer recommendations of operating parameters to maximize the machine’s efficiency. The project involved creating and assembling a three-dimensional model of the machine in Pro/ENGINEER, performing kinematic analysis on the model, using the output to produce a mathematical formula, and using that formula to both analyze and predict the operation of the machine. The mathematical model was verified successfully against field test data. It was then used to provide tractor and rotor speeds for a range of desired percentage of blossoms removed. It also accomplished the reverse, predicting the percentage of blossoms removed for a series of chosen tractor and rotor speeds.

    Dimensions

    Altmetric

    PlumX Metrics

    Downloads

    Download data is not yet available.

    Citations

    Crossref
    Scopus
    Google Scholar
    Europe PMC
    Costa G., Blanke M., Widmer A. 2013. Principles of thinning in fruit trees. Proc. EUFRIN thinning working group symposia. Acta Hortic. 998:17-26.
    Damerow L., Blanke M. 2009. A novel device for precise and selective thinning of fruit crops. Proceedings of ‘Precision Agriculture for Application on Fruits and vegetables’. Orlando, Florida (G. Albrigo and Ehsani, eds.). Acta Hortic. 824:175-81.
    Eckhardt H.D. 1998. Kinematic design of machines and mechanisms. McGraw-Hill Professional.
    Green Deal, 2023. European Commission. Available from: https://commission.europa.eu/strategy-andpolicy/priorities-2019-2024/european-green-deal_de (assessed 10 April 2023)
    Hehnen D., Hanrahan I., Lewis K., Damerow L., Blanke M. 2012. Mechanical flower Thinning improves fruit quality of apples and promotes consistent bearing. Sci. Hortic. 134:241-4.
    Hiraoka R., Aoyagi Y., Kobayashi K. 2023. Automatic travelling of agricultural support robot for a fruit farm. J. Agric. Eng. LIV: 1355.
    Krasniqi A.L., Damerow L., Kunz A., Blanke M. 2013. Quantifying key parameters as elicitors for alternate fruit bearing in cv. ‘Elstar’ apple trees. Plant Sci. 212:10-4
    Lammerich S., Kunz A., Damerow L., Blanke M. 2020. Mechanical crop load management (CLM) improves fruit quality and reduces fruit drop and alternate bearing in European Plum (Prunus domestica L.). Horticulturae 6:52.
    Netsawang P., Damerow L., Schulze Lammers P., Kunz A., Blanke M. 2023. Alternative approaches to chemical thinning for regulating crop load and alternate bearing in apple. MDPI Agron. 13:112.
    Schupp J.R., Auxt Baugher T., Miller S.S., Harsh R.M., Lesser K.M. 2008. Mechanical thinning of peach and apple trees reduce labor input and increases fruit size. Hort. Technol. 18:660-70.
    Seehuber C., Damerow L., Blanke M. 2011. Regulation of source: sink relationship, fruit set, fruit growth and fruit quality in European plum (Prunus domestica L.)—using thinning for crop load management. Plant Growth Regul. 65:335-41.
    Untiedt R., Blanke M. 2001. Effect of thinning agents on apple canopy photosynthesis. Plant Growth Regul. 35:1-7.

    How to Cite

    Veal, D. (2024) “Kinematic model for mechanical apple blossom thinning”, Journal of Agricultural Engineering, 55(1). doi: 10.4081/jae.2024.1553.
    Copyright (c) 2024 the Author(s) Creative Commons License

    This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

    PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.