Original Articles
Vol. 39 No. 3 (2008)
https://doi.org/10.4081/jae.2008.3.43

TRANSMISSION OF IMPACTS DURING MECHANICAL GRAPE HARVESTING AND TRANSPORTATION

Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
3438
Views
1458
Downloads
Mechanical harvesting, mechanical vibrations, quality, losses.

Authors

Fabio Pezzi
claudio.caprara@unibo.it
, .
Claudio Caprara
, .
Francesco Bordini
, .
The aim of the research was to study vibrational stress on grapes during mechanical harvesting, transfer and delivery to the winery, in order to identify the most critical stages and the consequent effects on the winemaking. An instrumented sphere was used to evaluate and memorise the impacts in the grape harvester and means of transport. Three treatments, obtained by differing harvesting method (manual and mechanical) and transport type (short and long distance), were compared. A correlation was sought between the transmitted stresses and characteristics of the harvested product. The effects on product quality were evaluated by chemical analyses of the musts and sensorial analysis of the end-product, vinified using the same procedure.

Downloads

Download data is not yet available.

How to Cite



“TRANSMISSION OF IMPACTS DURING MECHANICAL GRAPE HARVESTING AND TRANSPORTATION” (2008) Journal of Agricultural Engineering, 39(3), pp. 43–48. doi:10.4081/jae.2008.3.43.

PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.